This will help the SRP make more informed cleanup decisions, respond more accurately to questions and improve our ability to review your data more quickly and accurately. Each tank’s totalizer reading(s) should be entered in the same column to ensure the correct readings are provided for that specific tank. This can result in shortages of up to hundreds of gallons.
The document provides language that the LSRP should use in the Response Action Outcome (RAO) to provide notice to future site owners and occupants that DAP is present. Contact the Bureau of Underground Storage Tanks at (609) 292-8761 to request a copy. The measurements are to be read to the nearest 1/8″. Due to time delays in taking the measurements to writing down the numbers in the office, it is best to write down the tank measurement as it is taken. When combined readings are provided, a statement clarifying the rationale for combined readings should be provided. This guidance is not intended to supersede any rule or regulation.
Please remember that Wireshark works with Layer 2 packets (usually called “frames”). So we had to add an Ether() header to our ICMP packets. Предел допускаемой дополнительной погрешности измерения МЭД при изменении температуры окружающей среды от минус 20° до плюс 50°С не превышает ± 5 %. Предел допускаемой дополнительной погрешности измерения МЭД при изменении ориентации блока детектирования в магнитном поле Земли не превышает ± 2,5 %. Each chart is to be calibrated to 1/8 inch to gallon conversions. Stick or volume measurements are necessary prior to a delivery and following a delivery. Care should be taken when measuring for water through a drop tube in the tank, due to potential condensation on the walls of the drop tube.