Инструкция belimo be 230-12

инструкция belimo be 230-12
The EK-EU can be used in smoke extract systems which have been approved for extract ventilation. The fire-resistant smoke control damper for multiple compartments is suitable for installation in solid walls and ceiling slabs as well as in and on fire-resistant smoke extract ducts. Наши заказчики во всем мире привыкли полагаться на нас.


Всесторонняя культура качества является частью философии фирмы наряду с быстрой доставкой и близкими деловыми контактами. They are used for extracting smoke gases and for providing additional supply air to one or more fire compartments. Концепция стандартного изделия приводит к упрощению эксплуатации и обслуживания, что обеспечивает максимальную функциональность и экономичность. // ВНИМАНИЕ ! Уважаемые господа! For extracting smoke gases and for providing additional supply air to one or more fire compartments. According to the specified time- temperature curve, an EK-EU can still fully open or close after 25 minutes (MA, manual release). Regular maintenance of the smoke control damper is required to ensure its functional reliability. Smoke control dampers not only prevent the spreading of smoke and combustion products between fire compartments, they alsoprevent the leakage of emitted, dangerous and poisonous fire suppression gases from the affected area, and they maintain positive pressure in pressurisation systems.

Rectangular or square smoke control dampers to product standard EN 12101-8, tested to EN 1366- 10 and EN 1366-2, for use in smoke extract systems. The dampers are made of calcium silicate panels and are opened by an encased actuator; when smoke is detected, the actuator is triggered by a signal either from a duct smoke detector or from a fire alarm system. The EK-EU is suitable as a pressure relief damper for gas fire extinguishing systems.

Похожие записи: