Инструкция intel raid controller rs2wc040


The Recommended Customer Price (“RCP”) is pricing guidance for Intel products. Intel may make changes to manufacturing life cycle, specifications, and product descriptions at any time, without notice. Input none Output info on one logical drive per line, tab-separated: Logical drive ID RAID level Physical discs included, comma-separated Capacity (MB) State 1 0 0:1 80000 normal 2 5 0:2,0:3,0:4 10000 degraded 3 passthrough 0:7 73400 normal Creates one or more new logical drives.


The purpose of this article is to provide instructions for re-integrating a physical hard drive into an existing RAID array. Common unit of size used is Megabyte = 1024 * 1024 bytes. Compliance with the SAS 3.0 specification allows for bandwidth aggregation of 6Gb/s target data for transfer at 12Gb/s. Compatible with Intel’s current and future RAID products. This will add the drive back into the RAID array. 8. Select «Rebuild» and «GO» to start the rebuild process of the RAID 9. The rebuild can take quite a bit of time. Using Einarc API in your program takes a few simple steps:6.1. Add librariesEinarc modules should be loaded before use.

Pros: they usually include command-line interface (they’re scriptable), they’re suitable to call regularly and automatically to monitor status of discs, they don’t require rebooting, etc. Input logical drive ID. Output none normally, error message if error happened. Updates for existing devices: aaccli: now it downloads and uses later, more acceptable version, not linked against arts library. Обратитесь к своему представителю Intel, чтобы получить официальное подтверждение цены. Cons: of course, they require booted OS to run, and, worst of all, they’re also very incompatible with each other.

Похожие записи: